Disassembly, Stake the tent, Front door flap – Coleman 2000007823 User Manual

Page 2

Fig. 9

Fig. 10

Front

Door Flap

4010009476 (ECN20014620-A)

STITCH LINE

1. All stakes must be placed in the storage bag to prevent

damage to the fabric items placed in the carry bag.

2. Make sure all components are clean and dry before

placing in carry bag.

3. Store in a clean, dry area.

To Store

Things You Should Know:

t Under certain conditions (cold weather, high humidity, etc.)

condensation will form on the inside of your tent. Condensation
is caused by water vapor from your breath, perspiration, or any
wet clothing inside the tent. It is NOT LEAKAGE through the tent
fabric.

t Tree limbs, tree sap, bird droppings, or moisture steadily dripping

off tree limbs can cause damage to the tent fabric and its coating
resulting in leaks or loss of ﬂame-resistant properties.

t Never store tent, even for a short period of time, without drying it

thoroughly and brushing off caked dirt. Do not pack stakes inside
your tent. Use a separate storage bag.

t Stakes should be removed by pulling on the stake itself. NEVER

PULL ON THE TENT TO REMOVE STAKES AS THIS COULD RESULT
IN PROPERTY DAMAGE OR PERSONAL INJURY.

t Do not leave your tent set-up for weeks at a time. Be aware that

exposure to ultraviolet rays from the sun can seriously damage
material and/or cause it to become discolored.

t This product is not intended to be used during heavy rain, wind,

hail, snow or other inclement weather. Excess water build-up
can cause the frame system to be come unstable, and possibly
collapse, causing injury.

Disassembly

To take down the tent, follow the previous steps and
illustrations in the reverse order:
tRemove stakes. (Fig. 9)
tLower the frame one leg pole at a time by pushing the

lock buttons and collapsing the telescoping leg
poles. (Fig. 6)

t Fold the arm joints located at each of the tent

corners. (Fig. 4)

t Collapse the tent by folding the arms upward until the

tent stands upright with the hub assembly at the
top. (Fig. 1)

t Place the tent in the carry bag for storage.
TIP: After collapsing the tent, place it on its side, then roll
it multiple times with pressure to reduce its size. This will
allow the unit to slip into the carry bag.

This tent meets the ﬂammability requirements of CPAI-84. The
fabric may burn if left in continuous contact with any ﬂame source.
The application of any foreign substance to the tent fabric may
render the ﬂame-resistant properties ineffective.

WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM

THIS TENT FABRIC.

t The tent should be taken down and placed in storage during

windy conditions to avoid damage to product or personal injury.

t DO NOT use gas or ﬂame sources under or near this product.

Stake the Tent

t Secure tent by driving stakes through the

webbing loops sewn to the tent base. (Fig. 9)

t Keep the ﬂoor taut.

5IF$PMFNBO$PNQBOZ *ODt/PSUI)ZESBVMJDt8JDIJUB ,BOTBT64"

tXXXDPMFNBODPN

MADE IN CHINA

Coleman

, and

are registered trademarks of

The Coleman Company, Inc.

Tent

Stake

Webbing Loop

Front Door Flap

t For additional privacy, the front door ﬂap of the tent is

equipped with a zippered closure. (Fig. 10)