CHEVROLET 2011 Camaro - Manual (Page 34)

Black plate (6,1) Chevrolet Camaro Owner Manual - 2011
2-6 Keys, Doors and Windows
Starting the Engine Using Remote
Start
To start the engine using the remote
start feature:
1. Press
Q
on the RKE transmitter.
2. Press and hold / for about
two seconds. The turn signal
lamps will flash to confirm
the vehicle has been started.
The parking lamps will turn on
and remain on as long as the
engine is running. The vehicle's
doors will be locked.
3. The key must be inserted and
turned to ON/RUN before
driving.
The engine will shut off after
10 minutes unless a time
extension is done or the key is
inserted and turned to ON/RUN.
Extending Engine Run Time
For a 10-minute extension, repeat
Steps 1 and 2 while the engine is
still running. The remote start can
only be extended once.
When the remote start is extended,
the second 10 minutes will start
immediately.
For example, if the vehicle has
been running for 5 minutes, and
10 minutes are added, the engine
will run for a total of 15 minutes.
A maximum of two remote starts or
remote start attempts are allowed
between ignition cycles.
The vehicle's ignition switch must
be turned to ON/RUN and then back
to LOCK/OFF using the key before
the remote start procedure can be
used again.
Shutting the Engine Off After a
Remote Start
To shut off the engine:
. Press / until the parking lamps
turn off.
. Turn on the hazard warning
flashers.
. Insert the key and turn it to
ON/RUN and then back to
LOCK/OFF.