Replacement bulbs, Electrical system, Electrical system overload – CHEVROLET 2011 Camaro User Manual
Page 305: Vehicle care 10-43

Black plate (43,1)
Chevrolet Camaro Owner Manual - 2011
Vehicle Care
10-43
5. Push the bulb straight into the
socket and turn clockwise to
reinstall.
6. Reinstall the license plate lamp
by lifting it through the facia
opening until the clip is in place.
Replacement Bulbs
Exterior Lamp
Bulb
Number
Daytime Running
Lamp (Up-level
vehicles)
P13W
Fog Lamp
PS24W
Front Park and Turn
Signal Lamp
3457NAK
Halogen Headlamp
H13
License Plate Lamp
W5W
Rear Turn Signal
and Taillamps
3157K
For replacement bulbs not listed
here, contact your dealer.
Electrical System
Electrical System
Overload
The vehicle has fuses and circuit
breakers to protect against an
electrical system overload.
When the current electrical load is
too heavy, the circuit breaker opens
and closes, protecting the circuit
until the current load returns to
normal or the problem is fixed.
This greatly reduces the chance
of circuit overload and fire caused
by electrical problems.
Fuses and circuit breakers protect
the following in the vehicle:
.
Headlamp Wiring
.
Windshield Wiper Motor
.
Power Windows and Other
Power Accessories
Replace a bad fuse with a new one
of the identical size and rating.
If there is a problem on the road
and a fuse needs to be replaced,
the same amperage fuse can be
borrowed. Choose some feature of
the vehicle that is not needed to use
and replace it as soon as possible.