Canon CP200 - Manual (Page 30)

29
Battery Usage
Using the Battery Pack (CP-300 Only)
With the CP-300, you can use the rechargeable battery pack (Battery Pack NB-
CP1L) to print.
The battery pack can either be charged in the printer or with the separately sold
battery charger (included with the Battery/Charge Adapter Kit BCA-CP100).
„ „ „ „ Charging the Battery Pack in the Printer
Attach the battery pack NB-CP1L to the printer to charge it.
1
Remove the battery pack’s
terminal cover.
• When the battery pack is not in use, always
store it with its terminal cover on.
2
Press the battery cover lever
down and remove the battery
cover.
3
Install the battery pack.
• Slide the battery pack into place, in the
direction of the arrow, and push it in until it
clicks into place.
• To remove the battery pack, push the
battery cover lever down and pull the battery
pack out. Replace the battery cover
afterwards.
4
Attach the AC cable to the
compact power adapter CA-
CP100 and plug it into a power
outlet.
Terminal Cover
Compact Power Adapter
AC Cable
To Power Outlet