Canon CP200 - Manual (Page 28)

27
„ „ „ „ Turning the Printer’s Power Off
CP-300
Press the ON/OFF button until the indicator goes off.
CP-200
Unplug the cable of the compact power adapter from the printer. (The indicator will
go off)
3
Insert the plug in a power outlet.
4
Connect the Compact Power Adapter cable to the printer.
• Insert the cable with its mark facing up.
• With the CP-200, the power turns on at this point and the indicator lights green.
5
Connect the USB cable to the camera.
• Use the USB cable that came with your camera.
6
Connect the USB cable to the printer.
• Insert the cable in the left connector, with the mark on the cable facing
down.
7
Press the ON/OFF button until the indicator goes on. (CP-
300 only)
• The indicator lights green once the printer powers up.
• We recommend that you connect the camera’s compact power adapter (sold
separately or included with the camera) when using the camera with your printer. If
you wish to run the camera on battery power, be sure that batteries are fresh (fully
charged).
• When connecting the cable, be sure that the connectors on the cable match up
correctly with the connectors on the camera and printer.
• Use an easily accessible power outlet for the printer’s AC cable, so that you can
unplug the printer cable quickly in the event of a problem.
• Please also refer to the Usage Location section of Proper Usage and Handling for
information about printer usage location. p. 14
• Some camera models do not come with a compact power adapter. For details,
please see the System Map that came with your camera.