CEI 499 ULTRAK - Manual (Page 15)

5. Keep pressing the PAPER ADVANCING SWITCH until the end of paper is 2-3 cm
out from the printer.
6. Put the roll of paper into the paper compartment and close the paper cover.
Fig.27.
** NEVER pull paper from the reverse direction, this may damage the printer. For
replacing the roll of paper before it is used up, first tear off the paper and press
the PAPER ADVANCING SWITCH until all the remaining paper is out.
** Do not touch the paper on the right side as it may cause poor printing.
** Always store the paper rolls in a cool, dry place and keep away from direct sunlight.
CONNECTION TO PRINTER
1. Insert both plugs of the connecting cord to the printer and stopwatch with the power
of the printer turned off. Always hold the plug as illustrated in Fig.28. Either plug
can be inserted into either jack. Be sure that both jacks are inserted all the way in the
stopwatch and printer.
2. After use, turn off the power of the printer, then remove the plugs. After removing
the plug from the stopwatch, remember to insert the rubber cap to the jack to
keep it away from dust and moisture.