CEI 255 ULTRAK - Manual

DW 1A, DW 2A STOPWATCH
OPERATING INSTRUSTIONS
1
FEATURES
- PC105M2,E18M2 with STEP and DISTANCE functions
- PC105M4,E18M4 with STOPWATCH, STEP, CALORIE and
DISTANCE functions
- PC105U2,E18U2 with STEP and DISTANCE functions (for DW 2A)
- PC105U4,E18U4 with STOPWATCH, STEP, CALORIE and DISTANCE functions (for DW 2A)
- Large LCD digits for easy reading
OPERATION INSTRUCTIONS
STEP MODE
When C is at C2 position as shown in Fig.3 the indicator will be on at the STEP position. In this mode
the display shows the number of steps moved. Depressing A for 1 sec resets the display to zero.
DISTANCE MODE
When C is moved to the C4 position, the pedometer enters DISTANCE MODE as shown in Fig. 4a,
which shows the distance traveled corresponding to the number of steps moved. Pushing B in this
mode changes the display to as shown in Fig.4b, which is for setting of the stride of the step.
Pushing B once advance the strides by 1 where as push and hold B will advance strides at a rate of
4 Hz. The range of the presettable stride is 30 to 150cm. The display will return to display of distance
if B is not pushed for 4 seconds.
Fig. 1
Fig. 2
Fig. 3 STEP MODE
Fig. 4a DISTANCE MODE Fig. 4b SETTING STRIDE
PC105U2,
E18U2
PC105U4,
E18U4