CEI 499 ULTRAK - Manual (Page 14)

SYSTEM PRINTER
Fig.26.
BATTERY INSERTION
1. With the POWER SWITCH in the OFF position press and slide down the battery
cover.
2. Put in 4 pcs of AA size batteries in polarities as shown in the battery compartment.
3. Slide up the battery cover until it clicks closed.
** Always use batteries of the same manufacturer and replace all batteries at the
same time,
** If the printer will not be used for a long time, remove the batteries from the battery
compartment.
PAPER INSERTION
1. Open the paper cover.
2. Cut the end portion of the roll of thermal paper straight.
3. Turn on the printer.
4. Insert the end portion of the paper into the paper insertion slot in the correct way as
shown in Fig.27.
499-P (Optional)