Carl Goldberg GBGA1047 - Manual (Page 15)

15
❏
4. Install the throttle servo.
❏
5. Prepare a servo arm or a servo wheel and install a
screw-lock pushrod connector. Use a plastic retainer to
secure the connector to the servo arm.
❏
6. Fit the muffl er and any extension that you may need for
the main mixture control valve.
RADIO INSTALLATION
❏
1. Install a new radio switch in the right side of the fuselage.
There is a cutout for a switch there. Optionally you can install
a switch and charge jack, but you will need to mount it up
higher along the same former. You can also mount it to the
opposite side. The Great Planes Switch and Charge Jack
Mounting Set (GPMM1000) is a good choice because of its
thin profi le.
❏
2. Install a heavy duty Y-harness to the upper cabane struts
using small tie wraps to secure each lead of the harness to
the cabane struts. Note: We chose a heavy duty harness for
this application because of the long leads.