Buick 2010 Lacrosse - Manual (Page 333)

Vehicle Care 9-53
Bead : The tire bead contains
steel wires wrapped by steel
cords that hold the tire onto
the rim.
Bias Ply Tire : A pneumatic tire
in which the plies are laid at
alternate angles less than
90 degrees to the centerline of
the tread.
Cold Tire Pressure : The
amount of air pressure in a tire,
measured in psi (pounds per
square inch) or kPa (kilopascal)
before a tire has built up heat
from driving. See Tire Pressure
on page 9‑56.
Curb Weight : The weight of a
motor vehicle with standard and
optional equipment including the
maximum capacity of fuel, oil,
and coolant, but without
passengers and cargo.
DOT Markings : A code molded
into the sidewall of a tire
signifying that the tire is in
compliance with the U.S.
Department of Transportation
(DOT) motor vehicle safety
standards. The DOT code
includes the Tire Identification
Number (TIN), an alphanumeric
designator which can also
identify the tire manufacturer,
production plant, brand, and
date of production.
GVWR : Gross Vehicle Weight
Rating. See Vehicle Load Limits
on page 8‑12 .
GAWR FRT : Gross Axle
Weight Rating for the front axle.
See Vehicle Load Limits on
page 8‑12.
GAWR RR : Gross Axle
Weight Rating for the rear axle.
See Vehicle Load Limits on
page 8‑12 .
Intended Outboard Sidewall :
The side of an asymmetrical tire,
that must always face outward
when mounted on a vehicle.
Kilopascal (kPa) : The metric
unit for air pressure.