Date – BMW 2012 3 Series M3 Сoupe User Manual
Page 92
91
Controls overview
Controls
5.
Turn the controller until the desired minutes
are displayed, and then press the controller.
The time is stored.
Setting the time format
1.
"Settings"
2.
"Time/Date"
3.
"Format:"
4.
Select the desired format and press the
controller.
The time format is stored.
Setting time zone
1.
"Settings"
2.
"Time/Date"
3.
"Time zone:"
4.
Select desired time zone.
The time zone is stored.
Date
The settings are stored for the remote control
currently in use, refer also to Personal Profile on
page
.
Setting the date
In the instrument cluster
To set the dd/mm or mm/dd date format, refer
to Setting the date format below.
1.
Push button
1 in the turn signal/high beam
lever up or down repeatedly until the appro-
priate symbol appears in the display,
accompanied by the date and the word
"SET".
2.
Press button
2.
3.
Use button
1 to set the day of the month.
4.
Press button
2 to confirm the entry.
5.
Set the month and the year in the same way.
6.
Press button
2.
The system stores the new date.
Via iDrive
1.
"Settings"
2.
"Time/Date"
3.
"Date:"
4.
Turn the controller until the desired day is
displayed, and press the controller.
5.
Create the necessary settings for the
month and year.
The date is stored.
Setting the date format
1.
"Settings"
2.
"Time/Date"
3.
"Format:"
4.
Select the desired format.
The date format is stored.
Online Edition for Part no. 01 40 2 609 333 - © 08/11 BMW AG