Digital compass – BMW 2012 3 Series M3 Сoupe User Manual

Page 125

124

Controls

Practical interior accessories

by means of the hand-held transmitter was
interrupted, hold down the button on the
inside mirror and then press and release the
button on the hand-held transmitter several
times, holding it down for 2 seconds each
time.

Operation

To prevent possible damage or injury,
before programming or using the inte-

grated universal remote control to operate a
device, always inspect the immediate area to
make certain that no people, animals or objects
are within the pivoting or travel range of the
device being operated.
Also follow the safety instructions supplied with
the hand-held transmitter.

The button on the inside mirror can be used to
operate the device, for example the garage
door, if the engine is running or the ignition is
switched on. To do so, within the reception
range of the device, press the button of the
device until the function is triggered. The LED
on the inside mirror remains lit during transmis-
sion of the radio signal.

Deleting stored functions

Simultaneously hold down the right and left
buttons on the inside mirror for approx. 20 sec-
onds until the LED on the inside mirror flashes
rapidly. All stored functions are deleted. The
functions cannot be deleted individually.

Digital compass

1 Adjustment button
2 Display
The display shows you the main or secondary
compass direction in which you are driving.

Operating principle

You can call up various functions by pressing
the adjustment button with a pointed object
such as a pen or similar item. The following
adjustment options are displayed one after the
other, depending on how long you keep the
adjustment button pressed:

Press briefly: switch display on/off

3 to 6 seconds: set compass zone

6 to 9 seconds: calibrate compass

9 to 12 seconds: set left-hand/right-hand
steering

12 to 15 seconds: set the language