Chicago Electric MULTI-FUNCTION POWER TOOL 67256 - Manual (Page 4)

SKU 67256 For technical questions, please call 1-800-444-3353. Page 4
and off. Any power tool that cannot
be controlled with the Switch is
dangerous and must be repaired.
disconnect the Power Cord from
c.
the power source before making
any adjustments, changing
accessories, or storing the power
tool. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
Store idle power tools out of
d.
the reach of children and do not
allow persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
Maintain power tools. Check
e.
for misalignment or binding of
moving parts, breakage of parts
and any other condition that may
affect the power tool’s operation.
If damaged, have the power
tool repaired before use. Many
accidents are caused by poorly
maintained power tools.
Keep cutting accessories sharp
f.
and clean. Properly maintained
cutting accessories with sharp cutting
edges are less likely to bind and are
easier to control.
Use the power tool and its
g.
accessories in accordance with
these instructions, taking into
account the working conditions
and the work to be performed.
Use of the power tool for operations
different from those intended could
result in a hazardous situation.
Service
5.
have your power tool serviced by a.
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
Specific Safety Warnings
Maintain labels and nameplates on 1.
the power tool. These carry important
safety information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
CAUTION: Avoid accidental injury.
2.
Keep hands and fingers safely away
from the oscillating Angled Scraper
(4), Blades (501, 503), and Sanding
Pad (502) when operating the Tool.
Avoid unintentional starting. Prepare
3.
to begin work before turning on the
power tool.
Do not lay the power tool down until
4.
it has come to a complete stop.
Moving parts can grab the surface
and pull the tool out of your control.
When using a handheld power tool,
5.
maintain a firm grip on the tool with
both hands to resist starting torque.
Do not leave the power tool
6.
unattended when it is plugged into
an electrical outlet. Turn off the tool,
and unplug it from its electrical outlet
before leaving.
This product is not a toy. Keep it out
7.
of reach of children.
People with pacemakers should
8.
consult their physician(s) before
use. Electromagnetic fields in close
proximity to heart pacemaker could
cause pacemaker interference or
pacemaker failure. In addition,
people with pacemakers should:
• Avoid operating alone.