Maintenance and servicing, Please read the following carefully – Chicago Electric MULTI-FUNCTION POWER TOOL 67256 User Manual
Page 11
SKU 67256
For technical questions, please call 1-800-444-3353.
Page 11
MaINTENaNCE aNd
SERVICINg
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
TO PREVENT
SERIOUS INjURY
FROM aCCIdENTaL
OPERaTION:
Turn the Power Switch (44) of
the Tool to its “OFF” position
and unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
TO PREVENT SERIOUS
INjURY FROM TOOL
FaILURE:
do not use damaged
equipment. If abnormal noise
or vibration occurs, have the
problem corrected before
further use.
BEFORE EACH USE, inspect the
1.
general condition of the Tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical
wiring, and any other condition that
may affect its safe operation.
The Sanding Sheet (504) should not
be dull or contain excessive debris
build-up.
The Angled Scraper (4) and cutting
Blades (501, 503) should be clean
and sharp.
AFTER USE,
2.
clean external surfaces
of the tool with clean cloth.
If you notice decreased performance,
3.
have the unit serviced and Carbon
Brushes (40) replaced by a qualified
technician.
4.
WaRNINg! If the Power Cord
(46) of this Tool is damaged,
it must be replaced only by a
qualified service technician.
PLEaSE REad ThE
FOLLOWINg CaREFULLY
THE MANUFACTURER AND/OR
DISTRIBUTOR HAS PROVIDED THE
PARTS LIST AND ASSEMBLy DIAgRAM IN
THIS MANUAL AS A REfERENCE TOOL
ONLy. NEITHER THE MANUfACTURER
OR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF
ANY KIND TO THE BUYER THAT HE
OR SHE IS qUALIfIED TO MAKE ANy
REPAIRS TO THE PRODUCT, OR THAT HE
OR SHE IS qUALIfIED TO REPLACE ANy
PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR
ExPRESSLy STATES THAT ALL REPAIRS
AND PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT By
THE BUyER. THE BUyER ASSUMES ALL
RISK AND LIABILITy ARISINg OUT Of
HIS OR HER REPAIRS TO THE ORIgINAL
PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR
HER INSTALLATION Of REPLACEMENT
PARTS THERETO.