Avlink PG-3D1X - Manual (Page 7)

Side Panels
The PG-3D1X supports SDI interface. The SDI standard
transfers signals are uncompressed and are
self-synchronizing between the source (transmitter) and
destination (receiver). Most errors caused by noise or
interference can be detected, and the lost data recovered
by means of a specialized code called the Hamming code. A
signal in SDI can contain up to four independent digital
audio signals along with the video signal.
3G-SDI Output
Use for SDI 1.2M cable (BNC Male to Male).
List of SDI Video Formats:
Format Standard Clock Notes
720 x 525 i 59.94
ITU-R
BT.601
13.5MHz
625-line
“PAL”
720 x 625 i 50
ITU-R
BT.601
13.5MHz
525-line
“NTSC”
1280 x 720 p 60
SMPTE
296M
74.25MHz
1920 x 1080 i 60
SMPTE
274M
74.25MHz
1920 x 1080 p 30
SMPTE
274M
74.25MHz
1920 x 1080 p 50
SMPTE
424M
148.5MHz
1920 x 1080 p 60
SMPTE
424M
148.5MHz
Power Jack
Use for the DC 9V power adapter. The Power Jack is on
the side of the device.
7
Power Jack