Connect Tech DFlex-4/104 - Manual (Page 40)

2-16 Chapter 2: Hardware Installation
DFlex-4/104 User's Manual, ver. 0.04
Figure 7: SLIM socket to serial port relationship
9/ 2 10 11
Port 2
connector
Port 4
connector
Port 3
connector
Port 1
connector
SLIM socket 1
(ports 1 and 2)
SLIM socket 2
(ports 3 and 4)
To insert a SLIM into its connector follow these steps:
1. Place the SLIM into the socket almost vertically (about a 75
degree angle), making sure to align it properly before
inserting it into the socket.
2. Press downward and sideways on the SLIM until it latches
into the socket. Do NOT force the SLIM, the installation
process requires a small amount of force and should be very
smooth and easy. If you experience resistance, check the
alignment and insertion depth of the SLIM. Refer to
Appendix D: SLIM Insertion/Removal regarding the
insertion of a SLIM.