Figure 6: baud rate jumper block (j1) -13, Chapter 2: hardware installation 2-13 – Connect Tech DFlex-4/104 User Manual
Page 37
Chapter
2:
Hardware
Installation
2-13
DFlex-4/104 User's Manual, ver. 0.04
The DFlex4/104 is capable of baud rates up to 460.8 kbps (4X
oscillator) or 115.2 kbps (1X oscillator) depending on the position
of jumper J1. If the jumper is in the
off
position (default) during a
hardware reset, the maximum baud rate will be 115.2 kbps.
However if the jumper is in the
on
position during a hardware
reset the maximum baud rate will be 460.8 kbps. Please refer to
Figure 6 for a description and location of the jumper block J1.
Figure 6: Baud rate jumper block (J1)
Baud rate
jumper block
(J1)
O
ff=
11
5K
J1
O
n=4
60K
9/2
10
11