Avlink DVI-E2 - Manual (Page 2)

DVI-E8 FRONT VIEW
1. “DVI Out” Port
2. “DVI In” Port
3. “DDC COPY” Button
4. Power LED
5. Power Jack
DVI-E8 REAR VIEW
1. “CAT.5” Port
DVI-R FRONT VIEW
1. “DVI Out” Port
2. Power Jack
DVI-R REAR VIEW
1. Power LED“
2. CAT.5” Port
Installation
Before the installation:
When using it at the first time, you need to do the “EDID
data copy” action.
1. Connect the DVI male/male extension cable between
the monitor and the “DVI Out” port of DVI-E2 or DVI-E4
or DVI-E8.
2. Connect the power adapter to turn on the extender.
3. Turn on the monitor.
4. Press “DDC COPY” button to complete EDID
Read/Write action, then the Power LED will flash 3 times
and constant light.
-3-
Installation steps:
1. Turn off the PC and monitor.
2. Connect the DVI male/male extension cable between
the PC and the “DVI In” port of DVI-E2 or DVI-E4 or
DVI-E8.
3. Connect the DVI male/male extension cable between
the monitor and the “DVI Out” port of DVI-R.
4. Connect the CAT.5 cable between the DVI-E2 or DVI-E4
or DVI-E8 “CAT.5” port and the DVI-R “CAT.5” port of
extender.
5. Connect the power adapter to turn on the extender.
6. Turn on the PC and monitor.
Technical Specifications
Input/Output Signal
Pin # Signal Pin # Signal
1 T.M.D.S Data 2- 16 Hot Plug Detect
2 T.M.D.S Data 2+ 17 T.M.D.S Data 0-
3 T.M.D.S Data 2/4 Shield 18 T.M.D.S Data 0+
4 T.M.D.S Data 4- 19 T.M.D.S Data 0/5 Shield
5 T.M.D.S Data 4+ 20 T.M.D.S Data 5-
6 DDC Clock 21 T.M.D.S Data 5+
7 DDC Data 22 T.M.D.S Clock Shield
8 Analog Vert. Sync 23 T.M.D.S Clock+
9 T.M.D.S Data 1- 24 T.M.D.S Clock-
10 T.M.D.S Data 1+
11 T.M.D.S Data 1/3 Shield C1 Analog Red
12 T.M.D.S Data 3- C2 Analog Green
13 T.M.D.S Data 3+ C3 Analog Blue
14 +5V Power C4 Analog Horz Sync
15 GND C5 Analog Ground
-4-
Wiring Information & Coding
Conductor
Identification
RJ45 Pin
Assignment
Color Code for
Conductor
5 White-Blue
Pair 1
4 Blue
1 White-Orange
Pair 2
2 Orange
3 White-Green
Pair 3
6 Green
7 White-Brown
Pair 4
8 Brown
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.
-5-