Avlink YH-01 - Manual (Page 2)

REAR VIEW
1. Vertical position adjust
Adjust switch when screen position is right or left
slant.
2. Horizontal position adjust
Adjust switch when screen position is lower or upper.
3. Sharpness adjust
Adjust switch “SHARP” To correct flickering text or
line.
4. “HDMI Out” Port
5. Input Power Jack
TOP VIEW
1. Power LED
-3-
Installation
1. Connect the YH-01 video/audio input RCA connector
with RCA Video/audio male to male cable from different
audio/video equipment.
2. Connect the HDMI Female extension cable between the
monitor and the “HDMI Out” port of YH-01.
3. Connect the power cord and turn on the YH-01.
4. Turn on the DVD and digital monitor or projector.
Support VGA mode
Analog Resolution Frequency(Hz)
480i(NTSC) 1440x480 59
480p 720x480 59
576i(PAL) 1440x576 50
576p 720x576 50
720p 1280x720 50 / 60
1080i 1920x1080 50 / 60
1080p 1920x1080 50/ 60
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.
-4-