Antari M-8 - Manual (Page 9)

9
Switching the Quick Start mode on and off
Press the button FUNCTION until the display indicates »Quick Start On«. Use the buttons
UP and DOWN to switch Quick Start mode of machine.
Quick Start mode:
If the “Quick Start” mode is activated, the M-8 will call the operating mode of previous
operation when it is turned on. For instance, if the timer was selected last time, the machine
will be directed in timer mode after the warm-up process is completed.
-Volume operation
Press the button VOLUME, to activate fog output at setting volume (High or Medium or Low
output). The display indicates »Volume« followed by the output that was set in menu item
»Volume Out«. To stop the fog output, press the button OFF (MANUAL).
-Manual operation
For immediate fog output at the maximum volume of fog, when the LCD screen displays
“Ready To Fog”, keep the button MANUAL pressed. The display indicates »Manual 100 %«.
The fog machine will always emit the maximum volume of fog when the button MANUAL is
pressed. As soon as you release the button, the fog output will stop.
-Timer operation
In the timer mode, the fog machine will automatically emit fog. The time intervals, duration
and fog volume depend on the corresponding menu settings. Press the button TIMER, to
activate the timer mode. The display indicates the set time interval. The unit counts down to
0 seconds and emits fog. To deactivate the timer mode, press the button OFF (MANUAL).