Antari M-8 - Manual (Page 15)

15
Technical Specifications
MODEL M-8
Power Supply 100~230V AC, 50/60 Hz~
Power Consumption 1800W
Output Volume 700m3/min
Tank Capacity 10 liters
Fluid Consumption 7 min / Liter
Weight 22.5 kg
Dimensions(LxWxH) 668x319x170 mm
Remote Included M-21
Optional Remote M-31
Warm-Up Time 8 min
Performance Note
All fog machines develop condensation around the output nozzle. This may result in some
moisture accumulation on the surface below the output nozzle, gently wipe it clean. In order
to give the best performance and longest life-span of fog machines, please use high quality
fog fluids which Antari or the authorized distributor’s recommends.
Maintenance / Storage
Do not allow the fog fluids to become contaminated. Always replace the cap on the fog liquid
container and the fog machine liquid tank immediately after refilling. Cleaning your fog
machine regularly can help you to reduce the frequency of parts replacement and
maintenance costs. After every 40 hours of continuous operation, it is recommended to use
distilled water to clean the heater according to the steps below.
The recommended cleaning steps is as followings:
1. Fill properly distilled water into a clean tank and connect the fluid tube of the fog machine