American Diagnostic Corporation (ADC) Diagnostix 75XX - Manual (Page 9)

Manometer Quality Control
A Serial number and Lot number are automati-
cally assigned to every aneroid during manufac-
turing, ensuring every item is "controlled".
The Serial Number can be located on the face-
plate of each aneroid (Figure 4).
The Lot number is located on the outside label of
the manometer packaging (Figure 5).
Standards
ANSI/AAMI/ISO 81060-1:2007
EN/ISO 81060-1:2012
Disposal
When your sphygmomanometer has reached its end of life, please be sure to dispose of it
in accordance with all regional and national environmental regulations. Devices that have
become contaminated should be disposed of in accordance with all local ordinances and
regulations.
Symbol Definitions
The following symbols are associated with your ADC ® Diagnostix TM Aneroid
(Figure 4)
Serial Number
LOT 0 00000 000
Lot Number
(Figure 5)
Symbol Definition
Important Warning/Caution
Latex-Free
Circumference Size
Conforms to EU Standards
Symbol Definition
Authorized European
Represenative’s Information
Manufacturer’s Information
Temperature Limit
Humidity Limitation
° F