Akro-Mils Laser_Ink_Insert_29300 User Manual
Laser/ink jet compatible inserts
LASER/INK JET COMPATIBLE INSERTS
For Label Holder Item #29300
INSTRUCTIONS
USING YOUR WORD PROCESSING SOFTWARE:
1. CREATE A CUSTOM LABELS TEMPLATE:
•
Select Tools from your Toolbar
•
From the drop down window select Envelopes & Labels
•
On the Labels Tab;
•
Click the Options button
•
In the box labeled Label Products: Choose "Other"
•
Click on the New Label button
2. SETTINGS:
•
In the box labeled Label Name: Enter a name for your New Labels (i.e. Our Product #29300)
•
Top Margin:
1.38"
•
Side Margin:
1.25"
•
Label Height:
0.69"
•
Vertical Pitch:
0.69"
•
Label Width:
2.9375"
•
Horizontal Pitch: 2.9375"
•
Number Across: 2
•
Number Down:
12
•
Set Page Size: Letter, 8-1/2" x 11"
•
CLICK OK
You now have a custom template saved for your "New" Akro-Mils Label Holder Inserts. You can create a full page of the same
label, single labels, or mail merges. To use this template at another time: Click on Tools, Envelopes & Labels, Label Products,
Select "Other" then click on the Product # (This is the Label Name you just created i.e. 29300).
NOTE:
Labels to be inserted into Holder with the beaded side at the top to ensure proper fit when installed.
1293 South Main St.• Akron, OH 44301
1-800-253-2467 • www.akro-mils.com
Inserts for
FITS BIN SIZES
QTY.
Item #
29300
30110, 30120, 30130, 30150,
30170, 30128, 30138, 30158, 30178,
30124, 30164, 30184, 30174
72