Indicator lights – Acura 2001 Integra Sedan - Owner's Manual User Manual
Page 58

Indicator Lights
Parking Brake and
Brake System Indicator
This light has two functions:
1. This indicator comes on when you
turn the ignition switch ON (II). It
is a reminder to check the parking
brake. Driving with the parking
brake not fully released can
damage the brakes and tires.
2. If the indicator remains lit after
you have fully released the
parking brake while the engine is
running, or if it comes on while
driving, it can indicate a problem
in the brake system. For complete
information, see page
.
Supplemental Restraint
System Indicator
This indicator lights when you turn
the ignition switch ON (II). If it
comes on at any other time, it
indicates a problem in the
supplemental restraint system. For
complete information, see page
.
Anti-lock Brake System
(ABS) Indicator
This light normally comes on for a
few seconds when you turn the
ignition switch ON (II), and when
the ignition switch is turned to
START (III). If this light comes on at
any other time, there is a problem in
the ABS. If this happens, take the
car to your dealer to have it checked.
With the light on, your car still has
normal braking ability but no anti-
lock. For complete information, see
page
.
Low Fuel Indicator
This light comes on as a reminder
that you must refuel soon.
Immobilizer System
Indicator
This indicator comes on for a few
seconds when you turn the ignition
switch ON (II). It will then go off if
you have inserted a properly-coded
ignition key. If it is not a properly-
coded key, the indicator will blink
and the engine will not start (see
page
).
This indicator also blinks several
times when you turn the ignition
switch from ON (II) to ACCESSORY
(I) or LOCK (0).
Instruments and Controls
BRAKE
A B S
S R S
Main Menu
Table of Contents