beautypg.com

Lights – Acura 2001 Integra Sedan - Owner's Manual User Manual

Page 208

background image

Lights

4. Remove the socket by turning it

one-quarter turn counterclockwise.

5. If the turn signal light bulb or

tail/stoplight bulb is burned out,
remove it by pushing it in and
turning counterclockwise. If the

side marker light bulb is burned
out, remove it by pulling it straight
out of its socket.

6. Install the new bulb in the reverse

order of removal.

7. Push the socket into the light

assembly and turn it clockwise
until it locks.

8. Test the lights to make sure the

new bulb is working.

9. Install the wall lining and the trunk

wall cover and secure them with
the fasteners. Refer to page

206

for reinstallation of the

fasteners.

Removal and Reinstallation of
Fasteners

(A Type)

Removal:

Turn the center of the fastener one-

quarter turn counterclockwise using
a coin or a screwdriver. The center

will come out slightly. Then remove
the fastener.

CONTINUED

Maintenance

Main Menu

Table of Contents