beautypg.com

Cooling system – Acura 2001 Integra Sedan - Owner's Manual User Manual

Page 178

background image

Cooling System

5. Remove the reserve tank from its

holder by pulling it straight up.
Drain the coolant, then put the
tank back in its holder.

6. When the coolant stops draining,

tighten the drain plug at the
bottom of the radiator. Put a new
washer on the drain bolt, then
reinstall the drain bolt in the
engine block. Tighten it securely.

Tightening torque:

58 Ibf.ft (78 N.m , 8.0 kgf.m)

7. Pour Honda All Season

Antifreeze/Coolant Type 2 into
the radiator up to the base of the
filler neck. This coolant is a

mixture of 50 percent antifreeze
and 50 percent water. Pre-mixing
is not required.

The cooling system capacity is:

With 5-speed manual transmission:

(LS, GS)

1.16 US gal (4.4 ,0.97 Imp gal)

(GS-R)

1.24 US gal (4.7 ,1.03 Imp gal)

With automatic transmission:

1.24 US gal (4.7 ,1.03 Imp gal)

8. Start the engine and let it run for

about 30 seconds. Then turn off

the engine.

CONTINUED

Maintenance

RESERVE TANK

HOLDER

FILLER NECK

Fill up to here

RESERVE

TANK CAP

Main Menu

Table of Contents