beautypg.com

Cooling system – Acura 2001 Integra Sedan - Owner's Manual User Manual

Page 179

background image

Cooling System

9. Fill the reserve tank to the MAX

mark. Install the reserve tank cap.

10. Check the level in the radiator,

add coolant if needed.

11. Install the radiator cap, and

tighten it to the first stop.

12. Start the engine and let it run until

the radiator fan comes on two

times. Then stop the engine.

13. Remove the radiator cap. Fill the

radiator with coolant up to the

base of the filler neck.

14. Start the engine and hold it at

1,500 rpm until the radiator fan
comes on. Turn off the engine.
Check the coolant level in the
radiator and add coolant if needed.

15. Install the radiator cap, and

tighten it fully.

16. If necessary, fill the reserve tank

to the MAX mark. Install the

reserve tank cap.

Maintenance

Main Menu

Table of Contents