beautypg.com

Installing a child seat – Acura 2005 NSX - Owner's Manual User Manual

Page 33

background image

Adjust the passenger’s seat and
seat-back as far forward as
possible to make room.

A child seat with a tether can be
installed in the passenger’s seat,
using the anchorage point shown
above.

Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.

The hardware is available for
purchase from your dealer (part
numbers: 82410-S84-C10 for the
hardware and 82419-S84-C00 for the
cover).

The hardware is stored in the glove
compartment.

Using the measurements shown,
poke a marker hole in the lining
behind the seat.

Use a razor blade or sharp knife to
cut a 1-inch (2.5 cm) diameter
circle around the marker hole,
then remove the cut upholstery.

Install the tether hardware.
Tighten the bolt to:

1.

2.

3.

4.

CONTINUED

Installing a Child Seat with a
Tether

Installing a Child Seat

U.S. Models:

Canadian Models:

Dr
iv

er
and

P

asseng

er
Saf

e

ty

31

4 in (10 cm)

1 in (2.5 cm)

9.7 in
(24.6 cm)

16 lbf·ft (22 N·m , 2.2 kgf·m)

Main Menu

Table of Contents