beautypg.com

Changing the oil and filter – Acura 2006 RSX - Owner's Manual User Manual

Page 177

background image

Open the hood, and remove the
engine oil fill cap. Remove the oil
drain bolt and washer from the
bottom of the engine. Drain the oil
into an appropriate container.

Refill the engine with the
recommended oil.

Engine oil change capacity
(including filter):

Remove the oil filter and let the
remaining oil drain. A special
wrench (available from your
dealer) is required.

Put a new washer on the drain bolt,
then reinstall the drain bolt.
Tighten the drain bolt to:

Check the oil filter to make sure
its gasket did not stick to the
engine block. A stuck gasket could
cause an oil leak.

Install a new oil filter according to
the instructions that come with it.

4.

3.

2.

(Type-S)

(RSX and Premium models)

Type-S

RSX and Premium models

5.

6.

7.

Changing the Oil and Filter

176

WASHER

OIL DRAIN BOLT

OIL FILTER

33 lbf·ft (44 N·m , 4.5 kgf·m)

29 lbf·ft (39 N·m , 4.0 kgf·m)

5.0 US qt (4.7 )

4.4 US qt (4.2 )

Main Menu

Table of Contents