beautypg.com

Disc changer – Acura 2006 RSX - Owner's Manual User Manual

Page 116

background image

To load multiple CDs in one
operation:

Press and hold the load button
until you see ‘‘LOAd’’ in the
display, then release the button.

Insert the CD into the CD slot.
Insert it only about halfway; the
drive will pull it in the rest of the
way. You will see ‘‘BUSY’’ in the
display. The CD loaded indicator
turns red and blinks as the CD is
loaded.

When LOAd appears again in the
display, insert the next CD into the
CD slot.

Repeat this until all six positions
are loaded. The system will then
begin playing last CD loaded.

If you are not loading CDs into all six
positions, press the Load button
again after the last CD has loaded.
The system will begin playing the
last CD loaded.

If you stop loading CDs before all six
positions are filled, and you do not
press the load button, the system will
wait for 10 seconds, then stop the
load operation and begin playing the
last CD loaded.

Your vehicle’s audio system has an
in-dash CD changer that holds up to
six CDs, providing several hours of
continuous entertainment. You
operate this CD changer with the
same controls used for the radio and
tape player.

To load CDs or operate the CD
changer, the ignition switch must be
in the ACCESSORY (I) or ON (II)
position.

Load and play only standard round
CDs. Odd-shaped CDs may jam in
the drive or cause other problems.
You cannot load and play 3-inch (8
cm) CDs in this system.

On the upper left side of the
display, the CD number for an
empty position will begin blinking
and the green CD loaded indicator
will come on.

1.

2.

3.

4.

5.

CONTINUED

Operating the CD Changer

Loading CDs in the Changer

Disc Changer

Fe
a

tu

re

s

115

Do not use CDs with adhesive labels.
The label can curl up and cause the CD
to jam in the unit.

Main Menu

Table of Contents