Entering a destination – Acura 2007 MDX - Navigation Manual User Manual

Page 47

Navigation System

Showing the Map of City

With the

City

selection, the display

changes to the

Enter city name

screen.

When you have entered the desired city,
the display changes to a map. The
starting location will be the central
position in the selected city.

See Showing the Map of Current
Position on page 45 for instructions on
finding and entering your desired
destination.

Showing the Map of State

With the

State

selection, the display

changes to the

Select a state

screen.

After you select the desired state, the
display changes to a map of the state,
with the cross hairs located near the
middle.

Use the

Interface Dial

to move the

cross hairs to the area of the state close
to your intended destination. If desired,
rotate the

Interface Dial knob

change the map scale. When you have
the cross hairs in the desired area, push
in on the

Interface Dial

. The map scale

changes to a closer view.

Move the cross hairs to the desired
destination, then push in on the

Interface Dial

. The address of the

location you have selected will appear at
the top of the screen.

The yellow box indicates the area you
will see when you click on the current
map with the Interface Dial.

NOTE:
The address of the location will be
displayed on the 1/20, 1/8, 1/4, or 1/2
mile (80, 200, 400, or 800 m) scale map.

If this is the desired address, push in on
the

Interface Dial

again. If not, use the

Interface Dial

to reposition the cross

hairs, then push in on the

Interface

Dial

again to display the new address.

Once you select an address, the system
then displays the

Calculate route to

screen (see Driving to Your Destination
on page 50).

Entering a Destination