System set-up – Acura 2007 MDX - Navigation Manual User Manual
Page 106
105
Navigation System
System Set-up
I
Recommended Display mode Day/Night settings:
• With the headlights on, select mid range for the dash illumination (see Owner’s manual for location of knob).
• With the headlights off, select mid range for the dash illumination (see Owner’s manual for location of knob).
• On the Setup “Color” adjustment screen, choose White for the map
Day
display, and black for the map
Night
display (see
page 103). Inappropriate adjustment of these colors can cause the
Day
/
Night
modes to appear inoperative.
llumination control
Priority Operation
Override conditions
(
Display mode
)
button (
see page 11
)
1
Allows selection of
Day
,
Night
or
Off
display
mode. This button has the highest priority and
overrides all other display control adjustments
listed below.
When the car is restarted, the display mode
previously selected by this button is canceled,
and the display mode is determined by one of
the controls below.
Sunlight Sensor (Middle of
dash near the windshield).
(See owner's manual for
location)
2
If the sunlight sensor detects daylight and the
headlights are turned on, the navi automatically
overrides (cancels) the
Night
display and
displays the
Day
display mode.
If desired, use the
(
Display mode
)
button to override this automatic choice.
Dash illumination adjustment
button (See Owner’s manual
for location)
3
When headlights are turned on, and you wish to
have the
Day
display mode, then adjust the
illumination to the full bright setting (beeps).
When the headlights are turned
ON
, adjust the
dash brightness down (counterclockwise) from
the maximum brightness position.
Headlights (On/Off)
4
When turned on, it changes the display to the
Night
display mode. The previous 3 controls
listed above can “cancel” this function.
Use the
(
Display mode
) button, or
adjust the dash illumination to full bright to set
the display to your desired choice.
Map
Day
/
Night
screen color
choice (
see page 103
for the
Day
and
Night
color choices)
N/A
The user can select the color of the screen that
will be displayed for the
Day
, and
Night
display modes described above.
For best contrast, ensure that the Map “color”
is white for
Day
, and black for
Night
.