Frequently asked questions – Acura 2007 MDX - Navigation Manual User Manual
Page 129

128
Navigation System
Frequently Asked Questions
Map, and Features, Voice Operation, Entering Addresses
Problem
Solution
Why does the
Disclaimer
screen need to be displayed every
time I start the car? I am the only driver.
The
Disclaimer
screen reminds you and your guest drivers to always
operate the navigation system in a safe manner.
The
Setup
or
Information
screen has “grayed out” items that
I cannot select. Why?
You need to select
OK
on the
Disclaimer
screen to view these items. See
System Function Diagram on page 26.
I tried entering an address, but the city or street could not be
found. Is there any other way to route to the location?
Some cities are lumped in with a major metro area Try entering the street
first. In rural “unverified” areas or new subdivisions, streets may be
missing, or only partially numbered. Try selecting the destination directly
from the map. See By Map Input on page 45.
When I enter an address, some letters become grayed out. Is
this normal?
Yes, as you enter each letter in an address or a point of interest (POI), the
system looks in the database to see what letters are possible and “grays out”
letters that do not apply.
How do I delete Personal Address, Previous Destinations, or
the Home Address?
This is done in Setup, under “Personal Information.” See page 84.
I cannot hear the navigation system voice.
1) Ensure that
Volume
in the
Setup
screen (first) is not
OFF
. See page 83.
2) Go to “Basic Settings” in the
Setup
screen (second), and set
Voice
Recognition Feedback
to
ON
. See page 90.
The voice control system is having difficulty recognizing my
Voice commands.
Ensure that the vents are not blowing on the microphone on the ceiling, the
vehicle is as quiet as possible, and that you are using the correct command
when speaking (See Improving Voice Recognition on page 14). Say “Help”
at any screen to see a list of the applicable voice commands.
When the system pronounces the street name in the guidance
command, or reads the destination address it sounds strange.
What causes this?
The basic guidance phrase uses a studio-recorded voice, but the street name
is pronounced by the system using a machine-generated voice.
Consequently, the name may be mispronounced or sound strange at times.
When I drive at night, the screen is bright and will not switch
to the night display mode. Why?
Verify the following: The display mode in Setup is set to
Night
mode, the
dash brightness is not set to maximum, and
Map Color
in Setup is set to
Black
for Night. See Switching Display Mode on page 104.