P387), Vsa® off button – Acura 2015 TLX - Owner's Manual (Revised 12/13/2014) User Manual
Page 388

387
uu
When Driving
u
Vehicle Stability Assist (VSA®), aka Electronic Stability Control (ESC), System
Driving
This button is on the driver side control panel.
To partially turn the VSA features on and off,
press and hold it until you hear a beep.
The traction control stops fully functioning,
allowing the wheels to spin more freely at low
speed. The VSA® OFF indicator will also come
on.
To turn it on again, press the (VSA® OFF)
button until you hear a beep.
VSA® is turned on every time you start the
engine, even if you turned it off the last time
you drove the vehicle.
■
VSA® OFF Button
1
Vehicle Stability Assist (VSA®), aka Electronic Stability Control
(ESC), System
With the
button pressed, your vehicle will have
normal braking and cornering ability, but VSA®
traction and stability enhancement becomes less
effective.
In certain unusual conditions when your vehicle gets
stuck in shallow mud or fresh snow, it may be easier
to free it with the
button pressed.
When the
button is pressed, the traction control
function becomes less effective. This allows for the
wheels to spin more freely at low speed. You should
only attempt to free your vehicle with the
button
pressed if you are not able to free it without.
Immediately after freeing your vehicle, be sure to
press the
button again. We do not recommend
driving your vehicle with the
button pressed
(indicator on).
You may hear a motor sound coming from the
engine compartment while system checks are being
performed immediately after starting the engine or
while driving. This is normal.
VSA® OFF Indicator
15 ACURA TLX-31TZ36000.book 387 ページ 2014年9月2日 火曜日 午後5時22分