Acura 2015 TLX - Owner's Manual (Revised 12/13/2014) - Manual (Page 333)

uu When Driving u Shifting
332
Driving
■ Shift Operation 1 Shift Operation
NOTICE
When you change ( D to ( R and visa versa, depress
the brake pedal to come to a complete stop, then
select the intended gear position while maintaining
brake pressure.
Use the gear position indicator and the shift button
indicator to check the gear position before selecting
a shift button.
If the indicator of the currently selected gear position,
or all the gear position indicators are blinking
simultaneously, there is a problem with the
transmission.
Avoid sudden acceleration and have the transmission
checked by a dealer as soon as possible.
The fuel supply may be cut off if you drive at engine
speeds in or over the tachometer’s red zone (engine
speed limit). If this happens, you may experience a
slight jolt.
When the engine speed is increased while the
transmission is in
( N, ( P or ( R, the fuel supply may
be cut off even without the engine speed entering
the tachometer’s red zone.
The beeper sounds once when you change to ( R.
Gear Position Indicator
Tachometer’s red zone
Press the ( P button.
Pull back the ( R button.
Press the ( N button.
Press the ( D button.
Shift Button
Indicator
M (sequential mode) Indicator
Sequential Mode
Gear Selection
Indicator
Models without
full color display
15 ACURA TLX-31TZ36000.book 332 ページ ２０１４年９月２日 火曜日 午後５時２２分