Sequential shift mode operation – Acura 2015 TLX - Owner's Manual (Revised 12/13/2014) User Manual
Page 342

341
uu
When Driving
u
Shifting
Driving
■
Second gear lock mode
If you pull the
(
+
paddle shifter while stopped or driving at 6 mph (10 km/h) or less,
the gear position will be locked in 2nd gear. This makes it easier to pull away on
slippery surfaces such as snow covered roads.
To cancel the 2nd gear lock mode, pull the
(
-
paddle shifter.
■
Sequential Shift Mode Operation
1
Sequential Shift Mode Operation
Each paddle shift operation makes a single gear
change.
To change gears continuously, release the paddle
shifter before pulling it again for the next gear.
Recommended Shift Points
Use this table as a guideline for efficient fuel
economy and effective emission control.
If the gear position indicator blinks when you try to
shift up or down, this means your vehicle speed is not
in its allowable gear range.
Slightly accelerate to shift up and decelerate to shift
down while the indicator is blinking.
Shift Up
Normal Acceleration
1st to 2nd
15 mph (24 km/h)
2nd to 3rd
25 mph (40 km/h)
3rd to 4th
40 mph (64 km/h)
4th to 5th
45 mph (72 km/h)
5th to 6th
50 mph (80 km/h)
6th to 7th
55 mph (89 km/h)
7th to 8th
60 mph (97 km/h)
Downshifting when pulling
the
paddle shifter.
(Changes to a lower gear)
Upshifting when pulling
the
paddle shifter.
(Changes to a higher gear)
Paddle Shifter
(Shift down)
Paddle Shifter
(Shift up)
15 ACURA TLX-31TZ36000.book 341 ページ 2014年9月2日 火曜日 午後5時22分