C m b s – Acura 2015 RLX - Advanced Technology Guide User Manual

Page 13

C o l l i s i o n M i t i g a t i o n B r a k i n g S y s t e m

T M

( C M B S

T M

)

Can alert you to the possibility of a front-end collision and help reduce the severity of
the collision if you are unable to avoid it. Alerts depend on the distance setting. See
Forward Collision Warning on page 21 for instructions on changing the distance
setting. Available with Advance Package.

T u r n i n g C M B S O f f o r O n

CMBS Off

A beep sounds and a message
appears in the MID.

CMBS On

A beep sounds, a message
appears in the MID, and the CMBS
indicator turns on.

* Depending on the circumstances, CMBS may not go through all of the alert stages before initiating the last stage.

4 S t a g e s o f C M B S *

Press and hold CMBS OFF.

Visual

warning

Audible

warning

Seat belt

retraction

Brake

application

Stage 1

Stage 2

Stage 3

Stage 4

Heads-up
warning timing
depends on the
CMBS distance
setting.

Lightly applied

Strongly applied

O p e r a t i n g A C C

Adaptive Cruise Control (ACC) with Low Speed Follow

Set a time or space interval between your vehicle and the vehicle ahead of you.
When the vehicle ahead changes speed, ACC senses the change and accelerates or
decelerates your vehicle's speed to maintain a set range. Available with Advance
Package.

Check the MID for
ACC information.

H o w t o U s e A C C

U s i n g A C C

1. Accelerate to the desired speed.

Above 25 mph: Go to step 2.
Below 25 mph (Low Speed Follow): Press SET/- to set the speed at 25 mph
when there is a vehicle ahead of you. If there is no vehicle ahead, ACC is
canceled.

2. Press SET/-, then release the accelerator pedal. The set speed is fixed, and

ACC begins.

3. To increase speed, press RES/+. To decrease speed, press SET/-.

4. If the vehicle ahead of you stops, your vehicle also stops. When the vehicle

ahead starts to accelerate, press RES/+ or SET/- or depress the accelerator
pedal to resume following at the set speed.

S t a n d a r d C r u i s e C o n t r o l

1. Press and hold the Distance button.
2. A beep sounds, and the selected mode appears in the MID.

MAIN

SET/-

Distance

RES/+

CANCEL

Turning ACC On
Press MAIN. ACC appears in the MID.

Canceling ACC
Press MAIN or CANCEL, or tap the brake
pedal.

15 RLX_KA_English_ATG_BQS51272_ATG_NEW STYLE 5/13/2014 12:45 PM Page 13