Casio EX-Z1050 User Manual

Page 205

205

USING THE CAMERA WITH A COMPUTER

• Insert the plug as far as it will go into the connector.

Failure to do so can result in poor communication or

malfunction.

• Take care when connecting the USB cable to the camera

or your computer. USB ports and cable plugs are shaped

for proper positioning.

Turn on the camera.

Camera-Computer Connection

Pressing the camera’s [ON/OFF] button puts it into the USB

mode, which is indicated by the camera’s operation lamp lighting

green. In this mode, your computer recognizes the memory card

loaded in the camera (or the camera’s built-in memory if it does

not have a memory card loaded) as a removable disk.

From now on, you will not have to perform steps 3 through 5 in

the above procedure when you connect the camera to your

computer (unless you change the camera’s USB settings for

some reason).
• With some Windows setups, you may see a guidance

message appear on your display to let you know about the

new removable disk. If this happens, simply close the

guidance message dialog box.

IMPORTANT!

• Never disconnect the USB cable without exiting the USB

mode first. Doing so can corrupt image data. See

for the correct steps you need to perform to disconnect the

camera from the computer safely.

USB Port

USB Cable

Making sure that the

W mark on the camera is

aligned with the

X mark of the USB cable plug,

connect the cable to the camera.

USB/AV

connector