Casio EX-Z1050 - Manual (Page 192)

192
PRINTING
■
Printing on a Printer that Supports
PictBridge
You can connect the camera directly to a PictBridge compliant
printer and print images without going through a computer.
• The camera also allows easy connection to a printer. Before
connecting to a printer, be sure to perform the following
procedure first.
1. Press [MENU].
2. On the “Set Up” tab, select “USB” and then
press [
X].
3. Use [ S] and [T] to select “PTP (PictBridge)”
and then press [SET].
4. Check the battery level indicator to make sure
that the battery is fully charged, and then turn
off the camera.
• If battery power is low, replace the battery.
• The camera does not draw power over the USB cable.
5. Use the USB cable that comes with the camera
to connect the camera to a printer.
• Insert the plug as far as it will go into the connector.
Failure to do so can result in poor communication or
malfunction.
• Take care when connecting the USB cable to the camera
or your printer. USB ports and cable plugs are shaped for
proper positioning.
USB
USB Port
USB Cable
USB/AV
connector
Making sure that the W mark on the camera is aligned
with the X mark of the USB cable plug, connect the
cable to the camera.