Casio IT-9000 - Manual (Page 62)

E-60
4. Before using the cradle ports, remove the caps from the ports.
Connect one end of the USB cable (DT-380USB-A) to the USB client port and the
other end to the PC.
The USB host port is used for connecting the cradle with other USB peripheral device.
PC
USB peripheral device
5. Turn on the power switch on the right side of the USB Cradle. The power LED on the
top of the USB Cradle lights red.
6. Push the IT-9000 fully into the USB Cradle until the mount hooks in the cradle engage
the mount holes in the IT-9000.
Check that the power LED on the top of the USB Cradle lights green and that
indicator 1 on the IT-9000 lights.
To remove the IT-9000 from the USB Cradle, push the removal buttons to disengage
the mount hooks from the mount holes and then lift the IT-9000 out of the cradle.