A&D Weighing MPA-1200 - Manual (Page 25)

23
[ 3 ] The pipette executes the set count of
aspirating-dispensing cycles by approx. 2/3 of
the set mixing volume.
[ 4 ] Press the Operation key on the pipette to
dispense the liquid remaining in the tip.
(When the blowout function is ON ( ).)
[ 5 ] One mixing operation is completed once the
aspirated liquid is completely discharged.
When the operation is completed a buzzer
sounds twice.
9-4 System setting mode（SYS）
The SYS mode is used to perform or read out pipetting operation settings that suit the
purpose or the liquid to be handled.
2) Operating the system setting mode
(The display is example.)
[ 1 ] Press the Back key.
Dispensing to absorption
Repeat with mixing count
set.