A&D Weighing MPA-1200 - Manual (Page 21)

19
9-2 Multiple dispensing mode (MD)
1) Operation of the multiple dispensing mode
This is a suitable function to dispense the same liquid continuously, such as when
dispensing a liquid on a microplate, etc. The operation consists of aspirating one time
and dispensing several times. When carrying out pre-rinse for multiple dispensing or
stopping multiple dispensing, use the total discharge function. (Refer to “9-8 Total
discharge function”)
2) Selecting the multiple dispensing mode
(The display is an example.)
[ 1 ] Press the Back key.
[ 2 ] Press the Up or Down key to select ”MD”.
[ 3 ] Press the Enter key to select multiple
dispensing mode (MD).
[ 4 ] Press the Up or Down key to set dispensing
amount for one time.
[ 5 ] Press the Enter key to confirm dispensing
amount for one time.
[ 6 ] Press the Up or Down key to set dispensing
count.
* “Dispensing amount for one time x dispensing
count” cannot be set if it exceeds the volume
range.