A&D Weighing FX-3000iWP - Manual (Page 68)

66
18. OPTIONS
Notes
The FXi-02, FXi-08 and FXi-09 can not be used at the same time.
The FX-i WP series balance does not comply with IP65 when the FXi-02, FXi-08 or FXi-09 and
AX-USB-9P-EX is used with the balance.
FXi-02 USB interface (Installed in the balance, Applicable OS: Windows 98 OSR2 or later)
Used to transmit the balance weight data (numerical value
only) uni-directionally to a personal computer via USB.
Can transmit the balance weight data (numerical value
only) directly to other application software such as
Microsoft Excel, Word and memo pad.
Driver installation is not necessary.
FXi-08 Ethernet interface
Used to connect the balance to a LAN.
The "WinCT-Plus" data communication software is
provided as an accessory and can perform the following.
Acquire data from multiple balances connected to a LAN.
Control these balances with commands.
Acquire data transmitted from balances.
Example: When pressing the
PRINT key of the
balance, data is output and is acquired by the computer.
The stored data can be used with Microsoft Excel (if
installed).
FXi-09 Built-in battery unit (Ni-HM rechargeable battery pack)
Charging time: Approx. 10 hours
Continuous operation hours: Approx. 8 hours
FX i –08 Example of use
FX i –02 Example of use