A&D Weighing FX-3000i - Manual (Page 68)

66
19. SPECIFICATIONS
FZ-120i FZ-200i FZ-300i FZ-1200i FZ-2000i FZ-3000i
Weighing capacity 122 g 220 g 320 g 1220 g 2200 g 3200 g
Maximum display 122.084 g 220.084 g 320.084 g 1220.84 g 2200.84 g 3200.84 g
Minimum weighing value (1 digit) 0.001 g 0.01 g
Repeatability (Standard deviation) 0.001 g 0.01 g
Linearity ±0.002 g ±0.02 g
Stabilization time (typical at FAST) Approx. 1 second
Sensitivity drift
(10°C-30°C/50
°F-86°F )
±2 ppm/°C
±0.010 g ±0.10 g ±0.15 g Accuracy right after calibration using
the internal mass. See notes below *
The value above is to the weighing capacity.
Operating environment 5°C to 40°C (41°F to 104°F)
85%RH or less (No condensation)
Display refresh rate 5 times/second, 10 times/second or 20 times/second
Minimum unit mass 0.001 g 0.01 g Counting
mode
Number of samples 5, 10, 25, 50 or 100 pieces
Minimum 100% reference mass 0.100 g 1.00 g Percent
mode
Minimum 100% display 0.01%, 0.1%, 1% (Depends on the reference mass stored.)
External calibration weight 100 g
50 g
200 g
100 g
300 g
200 g
100 g
1000 g
500 g
2000 g
1000 g
3000 g
2000 g
1000 g
Weighing pan diameter 130 mm 150 mm
Net weight Approx. 3.0 kg
External dimensions 193 (W) x 262.5 (D) x 84.5 (H) mm
AC adapter Confirm that the adapter type is correct for the local voltage and power
receptacle type
Power consumption Approx. 11VA (supplied to the AC adapter)
Interface RS-232C
* - Accuracy right after calibration using the accessory small breeze break and the internal
mass, in good ambient conditions (within the temperature range of 10 °C to 30°C (50°F to
86 °F) with no abrupt changes in temperature or humidity, no drafts, no vibration and no
effect by magnetic fields or static electricity).
- With the FZ-i series balance, the environment and passing age may cause internal mass
value error. Calibrate using an external mass and perform maintenance.