Kofax Communication Server 9.1 - Manual (Page 115)

Environment Guide Version 3.00.04
© Copyright Kofax, Inc. All information is subject to change without notice. 115
Cable Form
The cable has to be in one piece from end to end. It is not allowed to put more pieces together. Cables to
ISDN, Analogue or E&M devices must be shielded and have to be equipped with ferrite cores provided by
Kofax. The cores must be mounted as near as possible to the KCS Server. The cable has to be wound
around the core twice (turns as far apart as possible). Cabling has to be 26 AWG (0,13mm²) size as a
minimum.
Cabling Work
The cabling work cannot be performed by your KCS engineer.
Please have this work done by your company electrician.
On each end there have to be some meters left for later movements, plug mounting and maintenance.