Cleaning the cabinet and the lens, Maintenance, Vo l – Canon LV 7365 User Manual

Page 66

6. Maintenance

3. Reinstall the new filter cover.

NOTE: Do not wash the filter with soap and water. Soap and water will damage the filter membrane. Before replacing the

filter, remove dust and dirt from the projector cabinet. Keep out dust and dirt during filter replacement.

NOTE: When you replace the lamp, it is also wise to replace the filter. The filter comes in the same package with your re-

placement lamp.

4. Turn on the projector.
5. Reset the Filter counter. See page

❷

Cleaning the Cabinet and the Lens

1. Turn off the projector before cleaning.
2. Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use

strong detergents or solvents such as alcohol or thinner.

3. Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens.

KEY

STO

ING

INP

LAM

VOL

2. Gently peel off the filter (sponge) and replace it with the new one.