Inovonics FA464DR User Manual

Page 3

hc:21-Nov-03

Features of the FA464DR include:

x Full supervision of up to 64 FA transmitters.

x The FA464DR has 16 Form C Alarm Output Relays, plus a global Fault Output Relay.

x Transmitter, receiver and output options are factory assigned. They may be changed with the FA116

Executive Programmer or with the FA104 (upgraded C104) programmer.

x Intelligent global fault output for tamper, low battery and inactive transmitters. For example, if one of

the alarm outputs is assigned to monitor low battery faults, the fault output automatically becomes

tamper and inactive only.

x Manual and/or electronic reset of the receiver.

x Factory default programming: "Alarm" and "Inactive" outputs are programmed to follow transmitter

status; "Tamper" and "Low battery" outputs are latching. Latched outputs require the receiver to be

reset.

x Simple restoral to factory defaults.

x Automatic exit from programming after 4 minutes of inactivity.

x Transmitter Status LEDs show transmitter activation, tamper, low battery and inactive.

x The Programming LED blinks when the point IS NOT programmed, is on steady when the point IS

programmed.