Hardy Easy 8 User Manual
Page 12

In this example, the weight readings will be continuously updated, no further conditions will be
placed on this rung.
16. Enter another rung by double-clicking on the “Rung” instruction in the toolbox list. This will
add another rung in the diagram after the last rung.
17. Click and drag a “Block” instruction to this second rung and select the Zero function block
from the list, click Ok to insert it into the ladder diagram.
v
The Zero function block will allow zeroing of the gross weigh when run.
Set the slot number as before (in this example: 1).
18. To prevent the scale from continuously zeroing, a condition will need to be placed on the
rung.