GEA Bock F18 - Manual (Page 3)

D
GB
F
E
3
96246-07.2014-DGbRu
Contents
Page
1 Safety 4
1.1 Identification of safety instructions
1.2 Qualifications required of personnel
1.3 Safety instructions
1.4 Intended use
2 Product description 6
2.1 Short description
2.2 Name plate
2.3 Type code
3 Areas of application 8
3.1 Refrigerants
3.2 Oil charge
3.3 Operating limits
4 Compressor assembly 10
4.1 Setting up
4.2 Maximum permissible inclination
4.3 Pipe connections
4.4 Pipes
4.5 Laying suction and discharge lines
4.6 Operating the shut-off valves
4.7 Operating mode of the lockable service connections
4.8 Drive
4.9 Oil sump heater
5 Commissioning 16
5.1 Preparations for start-up
5.2 Pressure resistance test
5.3 Leak test
5.4 Evacuation
5.5 Refrigerant charge
5.6 Shaft seal
5.7 Shaft seal change
5.8 Start-up
5.9 Avoiding slugging
5.10 Oil separator
6 Maintenance 20
6.1 Preparation
6.2 Work to be carried out
6.3 Spare parts recommendation
6.4 Accessories
6.5 Excerpt from the lubricant table
6.6 Decommissioning
7 Accessories 22
7.1 Capacity regulator
8 Technical data 23
9 Dimensions and connections 24
10 Declaration of installation 26
11 Service 27