GEA Bock F18 - Manual (Page 26)

26
D
GB
F
E
96246-07.2014-DGbRu
10| Declaration of installation
DECLARATION OF INSTALLATION
for using the compressors within the European Union
(in accordance with Machinery Directive 2006/42/EC)
The manufacturer: GEA Bock GmbH, Benzstraße 7
D-72636 Frickenhausen, Tel.: +49 7022/9454-0
hereby declares that the refrigerating compressor F18 conforms to the essential requirements
of Annex II 1B of the Machinery Directive 2006/42/EC.
Applied harmonised standard:
EN 12693:2008 and the corresponding standards referenced
A partly completed machine may only be put into operation, when it has been established
that the machine, into which the partly completed machine is to be installed, conforms to the
regulations of the Machinery Directive (2006/42/EC).
The manufacturer undertakes to transmit electronically the special documentation required by
individual states for partly completed machinery upon request.
The special technical documentation required for partly completed machinery has been created
in accordance with Annex VII Part B.
Person responsible for documentation is:
Wolfgang Sandkötter, Benzstraße 7, 72636 Frickenhausen.
Frickenhausen, 04.09.2012 ppa. Wolfgang Sandkötter,
Chief Development Officer